Why do we list hole size information for our products?
For those that want to build their own item, or alter a stock item this information is important.
For instance if you wanted to have a patch panel with 3.5mm bulkheads and BNC bulkheads - the hole size information on our website would let you know that you would need to start with a panel that has 1/2" D holes as that is the only common hole size between both 3.5mm & BNC bulkheads.
 |
To the left are examples of the very basic connector/adapter type holes. |
 |
To the left are examples of the very basic connector/adapter type shapes.
|
 |
To the left is an example of how the different type of connector shapes fit in a round hole. In this type of scenario there is nothing to prevent the connector from spinning - this is fine for some connectors, but not all. |
 |
To the left is an example of the D and Double D type connector in a D Shaped hole. The flat of the connector installs against the flat of the hole to prevent spinning. |
 |
The connector to the left is an example of the type of connector that would be used in a D Shaped hole. |
VADCON, Inc.
PO Box 92414
Rochester, NY 14692
Phone: 800-899-9855
Fax: 888-686-4686
